Electrophoresis paint matching steps
- Categories:Company News
- Author:
- Origin:
- Time of issue:2021-05-12
- Views:
(Summary description)First use tap water to clean the electrophoresis tank slightly to remove the PVC and PP debris generated when the electrophoresis tank is produced.
Electrophoresis paint matching steps
(Summary description)First use tap water to clean the electrophoresis tank slightly to remove the PVC and PP debris generated when the electrophoresis tank is produced.
- Categories:Company News
- Author:
- Origin:
- Time of issue:2021-05-12
- Views:
Preliminary work of electrophoretic paint matching tank step
1. Clean the electrophoresis tank with tap water first to remove the PVC and PP debris generated during the production of the electrophoresis tank.
2. Wash with water again, add a little NaOH caustic soda to remove the oil stains on the inner surface of the tank, clean it, and pour out the sewage.
3. Thoroughly rinse with tap water 2-3 times, and start the filter pump to check whether the pipelines are leaking. Check whether the motor is rotating forward or backward.
4. Rinse twice with pure water, clean, and start the mixer.
5. Close the lid and wait for the cylinder to open. Electrophoresis equipment
Steps to prepare colored electric pulse
1. Take 0.5 liter of color paint or open a small bucket.
2. Take 1 liter of color paste and slowly add the color paste while stirring. Use an electric mixer to stir and stir for 30 minutes.
3. Move the agitated and evenly mixed color paste to a large plastic bucket.
4. Take 20 liters of 032# paint under the stirring of a large mixer, add it to the above-mentioned plastic bucket, fully stir for 1 hour, and then move it into the electrophoresis tank.
5. Repeat steps 1-4.
6. Put all the mixed solution of colored electrophoresis paint after the electrophoresis tank.
7. Move the large mixer to the electrophoresis tank and fully stir the electrophoresis paint for half an hour.
8. Under strong stirring, slowly add indicated pure water when adding slowly and intermittently.
9. When the sexual water level is added to the overflow tank, it will cost the filter pump to circulate.
10. When the sexual water level is added to the overflow tank, the filter pump cycle is spent.
11. The second swimming test.
12. Repeat steps 1-10 with the second tank.
Scan the QR code to read on your phone
More information
Follow the public account
Huizhou Hezan Technology Co., Ltd.
Service Hotlin：
Add：
No. 15, Chaoyang 2nd Road, Zhonggang Management District, Shiwan Town, BOLUO County, Huizhou
0752-6880551
Message 
Copyright © Huizhou Hezan Technology Co., Ltd. All Right Reserved 粤ICP备19133319号
Powered by: www.300.cn